The inoculation loop carrousel Autoloop Pro, which is suitable for up to 4 inoculation loops, was developed to comply with current requirements in microbiological, cellbiological and biotechnological laboratories.
Modern Design
The stable housing enables comfortable and easy access to inoculation loops. Removal positions on both sides make the carrousel equally suitable for right and left handers.
Saves Energy, Time and Costs
Precise flame sterilization time extends the life of the inoculation loops and reduces gas consumption. Continuous working during the flaming and the cooling phases of the inoculation loops saves up to 70% of time and makes it possible to work efficiently.
More Comfort
Keep all functions in view with the fully graphic display. The graphic menu control makes it easy to select all functions quickly. Flaming and cooling time can be adjusted to the second. During the flame sterilizing, the display shows the remaining flaming time. The Autoloop PRO rotates and controls flaming automatically, No unintentional use of hot inoculation loops: When flaming is completed, the display shows the remaining cooling time and the removal positions of cool inoculation loops. All the suspended inoculation loops can be flamed as needed in one full rotation of the carrousel.
For additional flame sterilisation (e.g. of bottle necks or test tubes) a foot pedal* can be activated during the automatic operation. For this purpose the Autoloop PRO turns the inoculation loop out of the flame position and enables additional flame sterilization.
More Safety
The nearly perpendicular position of the inoculation loop holder protects even the sleeve nut of the holder from possible contaminations. Additionally, an intelligent sensor of the Autoloop PRO monitors safe sterilization.
Robust
Fabricated entirely of stainless steel, anodized aluminium and a display, protected by heat resistant glass, the Autoloop PRO can withstand extreme laboratory conditions.
Less is more
The low gas consumption and the large savings in time set new standards for the laboratory.
*Foot pedal optional or in the delivery of the burner included
Technology: | Microprocessor |
Display: | fully graphic dot-matrix |
Rotational direction Inoculation loop holder: | left / right, depends on removed holder |
| Inoculation loop holder: | 1 - 4, with optical holder detection |
Time of flame sterilizing:
Time for cool-down period:
Additional flame sterilization: | 1 - 15 sec
1 - 45 sec
by foot oedal (optional) |
Safety features: | temperature control
flame activation warning
indicator of remaining cool-down
tilt sensor
residual heat display |
Stand by: | automatic unit switch off after 1 h
(or with stand-by time of the burner) |
Adjustable sterilization monitor: | 1 - Off
2 - low intensity
3 - middle intensity
4 - high intensity |
Electrical
Operating voltage: |
via Fuego SCS series / gasprofi SCS micro (foot pedal socket)
|
Mechanical
Casing: |
stainless steel & aluminum, UV and solvent resistant
|
Measurements
Pedestal (Art.-No. 8.000.400)
Pedestal (Art.-No. 6.000.400)
Height Autoloop PRO |
135 x 180 mm (w x d)
135 x 135 mm (w x d)
305 mm
|
Weight
Art-No. 8.000.400
Art-No. 6.000.400 |
1200 g
1100 g
|
Licenses
CE:
EU guidelines: |
EN 61326-1, EN61010-1, EN 61010-2-010
2014/35/EU, 2014/30/EU, 2011/65/EU
|
The range of the Autoloop Pro
- Autoloop Pro with pedestal
Fully graphic display
Foot pedal connection
Instruction manual
Operating manual and 2-year warranty - 4 Inoculation loop holders
- 4 Inoculation loops made of special stainless steel
Gas burner is not included.
Autoloop Pro
for Fuego SCS series |
Art.-No. 8.000.400
|
Autoloop Pro
for gasprofi 1 SCS micro serie |
Art.-No. 6.000.400
|
