Flame 100

Flame 100 - sets new standards in the Bunsen burner class! The safe alternative for all traditional Bunsen or alcohol burners!

Item Number: 2.100.000

- Flame without match
- Innovative safety Technologie
- Simple handling
- Cost-saving and environmentally friendly

The Flame 100 is ideally suited for all flame related applications in the laboratory. The 15 millimeter precision flame allows graduated heating of  ental tools as well as safe sterilization of microbiological instruments. Flame size and intensity can be adjusted infinitely.

Easy Operation
The safety Bunsen burner Flame 100 activates immediately with the push of a button. No match or a pilot flame are required. Optionally, the Flame 100 can also be operated by a foot pedal* or an external IR-Sensor*. The Flame 100 is suitable for stationary natural gas and  propane/butane gas supplies as well as gas cartridges or gas cylinders. Numerous adapter systems are optionally available.

Reliable safety
The proven Safety Control System (SCS) is also incorporated in the Flame 100. All potential hazards are constantly monitored and, if necessary, protective measures – such as the shutting off the gas supply – are activated. In addition to the ignition and flame control function and the overheating protection the safety package also features the continuous burner head control BHC. BHC unfailingly identifies burner head clogging by liquids or solid substances. Compared with a conventional Bunsen burner, the Flame 100 with the safety standard „SCS“ eliminates the risk of a gas leak or an explosion.

The Flame 100 is economical to operate and attractively priced for any laboratory, thus making savings for both your  udget and the environment. Compared with traditional Bunsen burners, the gas consumption is reduced to a minimum, because the flame burns only when it is really needed!

Compact and Rugged
The housing and burner tube are made of stainless steel. The removable burner tube makes cleaning easy and the small foot print is an advantage for any lab bench.

Flame 100 - for a safe flame in the laboratory!




Foot pedal:

Start-Stop with timer, 60 min
Standard (flame during pressed foot pedal, foot pedal optional)

Safety features
Safety Control System (SCS)
with gas safety cut off:

ignition and flame control, temperature monitor
burner head clogging monitor (BHC)
automatic unit switch off after 4h

Gas supply and consumption
Gas connection:

Gas types:

Connected load:

Continuous cartridge operation:




1/4” left with gas filter

II2ELL3B/P: natural gas E/LL,18 - 25 mbar
liquid gas, 47,5 - 57,5 mbar

43 g/h liquid gas, 49 l/h natural gas (LL)

CV 360 - 65 min
CG 1750 - 210 min
C 206 - 230 min
CP 250 - 305 min
CV 470 - 550 min
CV 270 - 280 min

Flame temperature:

Temperature threshold level:

1200 °C on liquid gas
1170 °C on natural gas (E)

0.55kW liquid gas, 0.50kW natural gas (E), 0.40kW natural gas (LL)

Power consumption:
Power connection:

2 VA (stand by max. 0.1 VA)
100-240V / 50/60Hz / max. 0.3 A; 9V DC / 1.3A
Level 6 (stand by power consumption max. 0.1W)

Burner tube:
Measurements (w x h x d):
Height with burner tube:

removable, stainless steel
89 x 34 x 88 mm
94 mm
385 g

DIN-DVGW Reg.-No.:
EU guidelines:

EN 61326-1, EN61010-1, EN61010-2-010
2014/30/EU, 2014/35/EU, 2011/65/EU

The range including tools for a simple start-up of the Flame 100.

  1. Safety laboratory Bunsen burner Flame 100 with button function
    SCS (Safety Control System) with BHC (Burner Head Control)
    Removable burner tube
    Holding device for 2 inoculation loop holders
    Instruction manual and 2-year warranty
  2. Tubing connector with swivel nut
  3. Switching power supply for global usage 100 - 240 V / 50/60 Hz (level 6)
  4. Screwdriver for electrode holder
  5. Wrench 17 mm for gas connection
  6. Nozzle natural gas (installed in the Flame 100)
  7. Nozzle for propane / butane gas

Gas-Safety Adapters, Tubes, Connectors, Cartridges
Foot Pedals

Durch die weitere Nutzung der Seite stimmst du der Verwendung von Cookies zu. Weitere Informationen