Today there is the gasprofi 1 micro school edition burner for optimal safety in the chemistry laboratory. In a chemistry lab in particular, safety is a crucial factor when working with a flame. Bunsen burners were standard equipment in schools for many years but they were the cause of many accidents and fires.
Gasprofi 1 micro school edition changes all this!
This safe gas burner for sterilizing, heating and other flame related applications combines all the functional advantages needed in modern schools.
Flame monitor for more safety
The flame is re-ignited automatically if it goes out inadvertently. For exemple, if the flame is extinguished due to over-boiling of liquids and cannot be re-ignited, the burner automatically shuts the gas supply off for safety.
Simple and safe operation
Switch flame on and off at the touch of a button – no matches needed. Optionally the gasprofi 1 micro school edition can also be operated by a foot pedal* or an external IR-Sensor*. The gasprofi 1 SCS micro school edition is also suitable for connection to the fully automated innoculation loop carrousel autoloop Pro.
Energy-saving consumption
The flame burns only as long as it is required. With the DualKnob for adjusting gas and air flow, the flame can be precisely regulated.
Robust
All external components are made of stainless steel for maximum sterility. If liquids are spilled, they can flow out through a drain. The burner head can be removed for thorough cleaning.
Flexible use
Gasprofi 1 micro school can be used with natural gas or propane / butane gas. Special safety adapters are available for use with different gas cylinders.
Gasprofi 1 micro school edition – your choice for safe operation by teachers and students.
*optional
Technology | Microprocessor |
Programs
Button:
Foot pedal: |
Start-Stop with timer, 60 min
Standard (flame during pressed foot pedal, foot pedal optional)
|
Safety features
with gas safety cut off: | ignition and flame control temperature monitor
burner head clogging
automatic unit switch off after 4 hrs |
Gas supply and consumption
Gas connection:
Gas types:
Connected load:
Continuous cartridge operation: |
1/4” left with gas filter
II2ELL3B/P: natural gas E/LL,18 - 25 mbar
liquid gas, 47,5 - 57,5 mbar
70 g/h liquid gas, 95 l/h natural gas (LL)
CV 360 - 40 min,
Express 444 - 50 min,
CG 1750 - 150 min,
C 206 - 170 min,
CP 250 - 210 min,
CV 470 - 370 min
|
Temperatures
Flame temperature:
Temperature threshold level: |
1350 °C on liquid gas
1300 °C on natural gas (E)
1 kW liquid gas, 0.9 kW natural gas
|
Electrical
Power consumption:
Switching power supply: |
2 VA (stand by max. 0.1 VA)
100-240V / 50/60Hz / max. 0.3 A; 9V DC / 1.3A
Level 6 (stand by power consumption max. 0.1W)
|
Mechanical
Casing and operating controls:
Burner head:
Cover of burner shaft:
Measurements (w x h x d):
Weight: |
stainless steel / glass, UV and solvent resistant
removable and decomposable, stainless steel
Ø 23 mm, with drains
95 x 49 x 86 mm
700 g
|
Licenses
DIN-DVGW Reg.-No.:
CE:
EU guidelines: |
NG-2211AS0167
EN 61326-1, EN61010-1, EN61010-2-010
2014/30/EU, 2014/35/EU, 2011/65/EU
|
The range including tools for a simple start-up of the gasprofi 1 micro school edition.
- Safety laboratory gas burner gasprofi 1 micro school edition with button function
Safety Control System (SCS)
Removable and decomposable burner head
Nozzles for natural gas and propane / butane gas
Turbo flame
Instruction manual and 2-year warranty - Wrench 17 mm for gas connection
- Screwdriver for burner head and cover of burner shaft
- Tubing connector with swivel nut
- Tilt mechanism, right / left
- Switching power supply for global usage 100 - 240 V / 50/60 Hz(level 6) with different plugs for worldwide use
Gas-Safety Adapters, Tubes, Connectors, Cartridges
